Epson Perfection V39II

& “Uninstalling Your Applications” on page 18
Scanning Problems
Cannot Start Epson ScanSmart
❏ Make sure the USB cable is securely connected to the scanner and the computer.
❏ Use the USB cable that came with the scanner.
❏ Make sure the scanner is turned on.
❏ Wait until the status light stops
ashing
indicating that the scanner is ready to scan.
❏ Connect the scanner directly to the computer's USB port. e scanner may not work properly when connected
to the computer through one or more USB hubs.
❏ If you are using any TWAIN-compliant applications, make sure that the correct scanner is selected as the
scanner or source setting.
Pressing a Scanner Button Does Not Start the Application
Make sure the following applications are correctly installed.
❏ Epson ScanSmart
❏ Scanner driver (Epson Scan 2)
Related Information
& “Checking and Installing Your Applications” on page 17
Scanning Takes a Long Time
❏ Try scanning your original at a lower resolution setting to speed up scanning.
❏ Computers with USB 2.0 (high speed) ports can scan faster than those with USB 1.1 ports. If you are using a
USB 2.0 port with the scanner, make sure it meets the system requirements.
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear in Your Scanned
Image
❏ Clean the scanner glass.
❏ Remove any trash or dirt that adheres to the original.
❏ Do not press with too much force on the original or the document cover. If you press with too much force,
blurring, smudges, and spots may occur.
Solving Problems > Scanned Image Problems > Uneven Colors, Dirt, Spots, and so on Appear in Your Scanned Im …
52