Chapter 5 Control Panel 75
c F1/Ejectbutton
❏ Executesfunctionswhich are assigned tothe F1/Eject
button when the printer is in the PR2 mode. You can
assign optional functions to it by programming them
in the PR2 mode.
❏ Ejects paper when the printer is in the ESC/P or IBM
PPDS mode.
❏ When the printer enters the default setting mode, the
button works as a button to select the menu. You can
select the next menu by pressing this button. See
“Changing default settings” on page 94.
F1/Ejectlight (Yellow)
❏ Works as programmed only when the printer is in the
PR2 mode. You can program it when it is on, off or
flashes in the PR2 mode.
d Offline button
❏ Alternates the printer activity between offline and
online.
❏ When the printer enters the default setting mode, the
button works as a button to select the menu. You can
select the previous menu by pressing this button. See
“Changing default settings” on page 94.
Offline light (Yellow)
❏ On when the printer is offline.
To Next Page
Loading...
