Chapter 5 Control Panel 76
e F2 button
❏ Executes functions which are assigned to the F2
button when the printer is in the PR2 mode. You can
assign optional functions to it by programming them
in the PR2 mode.
❏ When the printer enters the default setting mode, you
can change the setting by pressing this button. See
“Changing default settings” on page 94.
F2 light (Yellow)
❏ Works as programmed only when the printer is in the
PR2 mode. You can program it when it is on, off or
flashes in the PR2 mode.
To Next Page
Loading...
