144 Managing Projectors
4. Select one of the menu options listed on the left, then change any
of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Pointer in the Settings menu
■ User’s Logo in the Extended menu
■ Reset All, Reset Air Filter Time, or Reset Lamp Hours in
the Reset menu
Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons. Choose a source, stop the
action, turn off the picture and sound, or turn the projector’s power
on or off.
To Next Page
Loading...
