72 Presenting Through a Wireless Network
6. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter. Choose Setup
Complete
and press Enter, then choose Yes and press Enter to
save your settings and return to the main EasyMP screen.
Enabling EAP-TLS Certificate Validation
1. Press Menu. Highlight Network and then press Enter.
2. Choose
To Network Configuration and press Enter.
3. Highlight
Security, then press Enter.
You see the following screen:
4. Press
Enter to show the menu, then choose EAP-TLS and press
Enter.
The certificate information appears on the screen.
5. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter. Choose Setup
Complete
and press Enter, then choose Yes and press Enter to
save your settings and return to the main EasyMP screen.
To Next Page
Loading...
