Epson PowerLite 1705c User Manual

Maintaining the Projector 151
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the
Menu button on the remote control or on the
projector’s control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
Reset, then press Enter.
You see this screen:
3. Select
Reset Lamp Hours and press Enter.
4. When you see the prompt, select
Yes and press Enter.
5. When you’re finished, press
Esc or Menu to exit the Menu
system.

Epson PowerLite 1705c Specifications

General

Brand	Epson
Model	PowerLite 1705c
Category	Projector
Language	English