Connecting to Computers, Cameras, and Other Equipment 41
Connecting an S-Video Source
1. Locate an S-Video cable (one is usually provided with your video
equipment or you can purchase one from Epson; see page 13).
2. Connect the cable to the S-Video connector on your player and
the
S-Video connector on the projector:
3. If you want to play sound through the projector, see page 45 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 17 or
the Quick Setup sheet for instructions on turning on the projector
and adjusting the image. Once the projector is turned on, select
the image source: press the
Search button on the remote control
or press the
Source Search button on the projector’s control
panel repeatedly until the image appears.
To Next Page
Loading...
Need help?
General