68 Presenting Through a Wireless Network
You see the following screen:
4. Press
Enter to show the menu, then highlight WEP and press
Enter.
5. For the WEP encryption setting, highlight
128 Bit or 64 Bit and
press Enter.
6. For Format, highlight
HEX to enable hexadecimal input or ASCII
to enable text input, then press
Enter.
7. If you chose
64 Bit, choose Key ID 1, 2, 3, or 4.
Highlight the
Encryption key text box and press Enter. Press the
pointer button to select individual letters; then press
Enter to
input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and
press
Enter. To toggle symbol settings or capital letters, highlight
the option and press
Enter. When you’re done, highlight Finish
and press
Enter.
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
ASCII
first. If that doesn’t work,
try Text2 and then Text3.
To Next Page
Loading...
