Epson PowerLite 1781W User Manual

141
Parent topic: Projector Maintenance
Related references
Projector Light Status
Projector Information Display - Info Menu
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury.

Epson PowerLite 1781W Specifications

General

Resolution	1280 x 800 (WXGA)
Contrast Ratio	10, 000:1
Projection Technology	3LCD
Projection Size	30 - 300 inches
Lamp Life (Eco Mode)	10000 hours
Connectivity	HDMI, VGA, USB
Wireless Connectivity	Yes
Keystone Correction	Vertical: ±30 degrees
Brightness	3200 ANSI Lumens (White), 3200 ANSI Lumens (Color)
Noise Level	37 dB (Eco Mode)