Connecting to an RGB VGA Video Source
You can connect the projector to a video source that has an RGB video output port using a VGA
computer cable.
1. Make sure the projector and your video source are turned off.
2. Connect the VGA computer cable to your video source's video output port.
3. Connect the other end to the projector's Computer port.
4. Tighten the screws on the VGA connectors.
If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's
Signal menu.
Parent topic: Connecting to Video Sources
Related references
Projector Parts - Rear
Input Signal Settings - Signal Menu
Connecting to an S-Video Video Source
If your video source has an S-Video port, you can connect it to the projector using an optional S-Video
cable.
1. Make sure the projector and your video source are turned off.
2. Connect the S-Video cable to your video source's S-Video output port.
3. Connect the other end to the projector's S-Video port.
Parent topic: Connecting to Video Sources
Related references
Projector Parts - Rear
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Make sure the projector and your video source are turned off.
2. Connect the cable with the yellow connector to your video source's yellow video output port.
3. Connect the other end to the projector's Video port.
Parent topic: Connecting to Video Sources
39
To Next Page
Loading...
Need help?
General