Related references
Projector Parts - Rear
Connecting to a Video Source for Sound
You can play the sound through the projector's speaker system if your video source has an audio output
port. Connect the projector to the video source using one of the following optional cables:
• RCA-type audio cable (with two RCA audio plugs on each end)
• Stereo mini-jack adapter cable (with one 3.5 mm mini-plug and two RCA plugs)
1. Connect the audio cable to your video source's audio-out port.
2. Connect the red and white plugs on the other end of the cable to the projector's audio ports that
correspond to the port you are using for video.
Parent topic: Connecting to Video Sources
Related references
Projector Parts - Rear
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector:
• USB flash drive
• Digital camera or camera phone
• USB hard drive
• Multimedia storage viewer
40
To Next Page
Loading...
Need help?
General