Epson PowerLite 1830 User Manual

1. Select the WEP setting from the drop-down menu.
2. For the WEP encryption setting, select 128Bit or 64Bit.
3. For the Format setting, select ASCII (to enable text input) or HEX (to enable hexadecimal input).
4. Select a WEP encryption Key ID (1, 2, 3, or 4).
5. In the encryption field for the number that matches your key ID, press Enter.
6. Use the displayed keyboard to enter the key used for WEP encryption as follows:
• 128 bit ASCII: Enter 13 alphanumeric characters
• 128 bit HEX: Enter 26 characters (0 to 9 and A to F)
• 64 bit ASCII: Enter 5 alphanumeric characters
• 64 bit HEX: Enter 10 characters (0 to 9 and A to F)
Parent topic: Setting Up Wireless Network Security
Enabling WPA or EAP Security
Set up the WPA or EAP security settings to match your network's settings. Check with your network
administrator for guidance on entering the correct information.
63

Epson PowerLite 1830 Specifications

General

Brand	Epson
Model	PowerLite 1830
Category	Projector
Language	English