Epson PowerLite 1835 Operation Guide

Two Connection Modes
9
Two Connection Modes
There are two methods of connecting a computer and the projector via a
network by using EasyMP Network Projection.
q
• Depending on the projector model, either wired LAN connection or wireless
LAN connection may not be available.
• To use the wireless LAN connection, you need the Wireless LAN unit for
the projector.
If the Wireless LAN unit is not supplied with your projector, please
purchase the optional accessory. See your projector User’s Guide for details
on optional accessories.
Quick Connection Mode
Quick Connection Mode is only available when you install the Wireless
LAN unit in the projector.
In Quick Connection Mode, you can connect the projector and the
computer directly using wireless communication. You can easily project
images on the computer without making complex network settings
because a wireless LAN access point is not required.
Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, and
connects to an existing network system.
In Advanced Connection Mode, you can connect the projector and the
computer via a LAN access point.
When connecting to a network via Wired LAN, connect the projector to
the network hub with a commercially available LAN cable.

Epson PowerLite 1835 Specifications

Operating Environment

operating temperature range	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	37 dB
fan noise (eco mode)	29 dB

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	355 W
power consumption (eco mode)	263 W

Display

projection method	front/rear/ceiling mount
native resolution	1024 x 768 (XGA)
aspect ratio	4:3

Lamp

lamp type	E-TORL 230 W UHE
lamp life (normal mode)	4000 hours
lamp life (eco mode)	6000 hours

Weight and Dimensions

dimensions including feet	13.58" x 10.35" x 5.17"
dimensions excluding feet	13.58" x 10.35" x 3.66"
weight	7.4 lb