Epson PowerLite 4100 Installation Handbook

INSTALLATION
HANDBOOK
Remote Control Information
Epson PowerLite 4100 / 4200W / 4300
5
Use the pointer button to move the pointer on the screen.
Press the Enter button once to left-click, or twice to double-click.
Press the
Esc button to right-click.
To drag-and-drop, hold down the Enter button. Then use the
pointer button to drag the object. When it’s where you want
it, release the
Enter button.
Operating Two or More Projectors With
the Remote Control
If you’re using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, set the remote control’s ID to match that of
the projector. Or you can control all the projectors at once by setting
the remote control’s ID to zero.
Setting the Projector ID
The projector’s default ID is set to O. This lets it respond to
commands from any remote control. To change the ID, follow these
steps:
1. Press the
Menu button on the remote control. You see the
projector’s menu screen.
2. Select
Extended, press Enter, select Projector ID, then press
Enter again.

Epson PowerLite 4100 Specifications

General

Brand	Epson
Model	PowerLite 4100
Category	Projector
Language	English