Setting Options Description
Power Consumption Normal Selects the brightness mode of
the projector lamp
Temp Interlock
Normal: sets maximum lamp
ECO
brightness
Temp Interlock: automatically
dims the lamp if the surrounding
temperature is too high for
normal operation
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
Volume Varying levels available Adjusts the volume of the
projector’s speaker system
Remote Receiver Front/Rear Limits reception of remote control
signals by the selected receiver;
Front
Off turns off all receivers
Rear
Off
User Button User1 Assigns a menu option to the
User1, User2, and User3
User2
buttons on the remote control for
User3
one-touch access
Test Pattern — Displays a test pattern to assist in
adjusting the image; press the
left or right arrow buttons on the
remote control or Enter on the
control panel to cycle through the
available test patterns, or Esc to
cancel pattern display
Memory Load Memory Save customized sets of settings
to memory
Save Memory
Erase Memory
Rename Memory
138
To Next Page
Loading...
Need help?
General