Epson Printer Administrator's Guide

Importing a CA-signed Certicate
c
Important:
❏ Make sure that the printer’s date and time is set correctly.
❏ If you obtain a certicate using a CSR created from Web Cong, you can import a certicate one time.
1. Access the printer’s Web Cong and select Network Security Settings > SSL/TLS, IPsec/IP Filtering or
IEEE802.1X > Certicate.
2. Click Import.
A certicate importing page is opened.
3. Enter a value for each item.
Depending on where you create a CSR and the
le
format of the
certicate,
required settings may vary. Enter
values to required items according to the following.
❏ A certicate of the PEM/DER format obtained from Web Cong
❏ Private Key: Do not
congure
because the printer contains a private key.
❏ Password: Do not congure.
❏ CA
Certicate
1/CA
Certicate
2: Optional
❏ A certicate of the PEM/DER format obtained from a computer
❏ Private Key: You need to set.
❏ Password: Do not
congure.
❏ CA Certicate 1/CA Certicate 2: Optional
❏ A certicate of the PKCS#12 format obtained from a computer
❏ Private Key: Do not
congure.
❏ Password: Optional
❏ CA
Certicate
1/CA
Certicate
2: Do not
congure.
4. Click OK.
A completion message is displayed.
Note:
Click
Conrm
to verify the
certicate
information.
Related Information
& “Accessing Web
Cong
” on page 11
&
“CA-signed Certicate Importing Setting Items” on page 34
Administrator's Guide
Using the Printer in a Secure Network
33

Epson Printer Specifications

General

Brand	Epson
Model	Printer
Category	Printer
Language	English