Epson PX-8 - Page 195

4.2.3 LCD Unit
Step 1.
Step 2.
Step 3.
Remove LCD unit.
Remove
cover panel. (not reusable)
Remove
two screws pointed by arrows.
Fig. 4-29
Step 4. Turn over unit and lift up unit slowly from screw side.
Step 5. Remove four screws pointed by arrows and lift up board slowly.
* Pay attention to contrast button and cover glass.
Fig. 4-30
Step 6. Move leg of fitting bracket.
Fitting bracket
Leg
of fitting bracket
r
LCD panel
MAP-LD
Zebra
board
Step 7.
Step 8.
Step 9.
Fig. 4-31
Remove fitting bracket with LCD face up.
Remove LCD
with zebra on it taking care for three pins.
Remove
four zebras and zebra guide.
4-14
REV.-A