Epson PX-8 - Page 210

REV.-A
(7) Keyboard Check
Step 1: Select
your keyboard type by responding with the number following the
specification of your unit.
The
following display data prompt will appear:
THEN DBP DATA KEY-IN !!
Fig. 5-22 Keyboard Test Display Data Prompt
Step 2: In response to the above prompt, key in characters to be displayed in the following
order:
1
2 345 678
12
39
44 46 48 50 52 54 56 58 60 62
66: 68
64 ; (68) (69)
70
( 70
71
(72)
Fig. 5-23 Keyboard Check Test Character Data Entry
* The numbers within the parentheses are for a 73-key keyboard .
•
When the key data entry ends, the following prompt appears .
... \/ ... h i \
" r .... 1\: J
Fig. 5-24 Keyboard Check Part 2 Test Entry Prompt
Step 3: If the keyboard check, part 2, test is desired, respond with uN" to this prompt. Other-
wise, key in "Y". The above part 1 test will be repeated .
• The
program enters the part 2 test and displays the following prompt:
KEY-BOARD CHECK Part 2
Fig. 5-25 Keyboard Check Part 2 Test Prompt
Step 4: Key in the same characters as randomly displayed, following the above prompt.
5-9