Epson SC-F3000 Series User Manual

Setting Item Setting Explanation
Actions Beyond
Threshold of Missing
Nozzles
Stop Printing Set the operation for when the number of clogged nozzles exceeds the
number set in Cleaning Setting - Threshold Of Clogged Nozzles.
Stop Printing displays the The Print head may require maintenance. It
is recommended to perform a Print Head Nozzle Check before
printing. message on the control panel screen, and then stops printing
and stands by.
Show Alert displays the above message on the control panel screen, but
continues printing without stopping.
Auto Cleaning performs maintenance before printing starts.
Show Alert
*
Auto Cleaning
Periodic Cleaning
Scheduled
1 to 9999 (60
*
)
You can set either time (minutes) or number of pages printed for the
timing at which to perform cleaning so as to keep the print head nozzles in
optimum condition.
Periodic cleaning is not done if you select Off.
Print Page
1 to 9999 (50
*
)
Off
*
Power On Cleaning
On
*
Set whether the printer automatically performs cleaning when the power
is turned on so as to keep the print head nozzles in optimum condition.
Off
Network Settings
Network Status Wired LAN Status You can check all the information for the various network settings that are
set in Advanced.
Selecting Print Status Sheet prints a list of the settings.
Print Status Sheet
Connection Check Diagnoses the current state of network connections, and displays the
results.
SC-F3000 Series User's Guide
Control Panel Menu
115

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English