C
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Alignment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best one
to choose, enter the numeric value that comes
between them. For example, if you are unsure
whether to enter pattern 0 or 2, enter 1.
D
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of #2
and #1, and then touch Alignment #3.
E
Enter the numeric value of the pattern with the
most visible straight lines among the adjustment
patterns of #3, and then touch Alignment #4.
In the following example, pattern 0 has the most
straight lines, so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best one
to choose, enter the numeric value that comes
between them. For example, if you are unsure
whether to enter pattern 0 or 2, enter 1.
F
In adjustment pattern #4, enter the numeric
value of the pattern with the most straight lines in
#3 on the screen.
G
Touch OK.
Printing of the second set of adjustment patterns
starts. For cut sheets smaller than A2 size, load
the second sheet of paper.
c
Important:
When using A2 size or larger cut sheets or roll
paper with the auto cut turned off, the part
with the first set of patterns printed on it is
pulled inside the printer to print the second set
of patterns. Do not touch the paper with your
hands.
H
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Alignment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
I
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of #2
and #1, and then touch Alignment #3.
J
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of #3
and then touch OK.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best one
to choose, enter the numeric value that comes
between them. For example, if you are unsure
whether to enter pattern 0 or 2, enter 1.
SC-F500 Series User's Guide
Loading and Setting the Paper
40
To Next Page
Loading...
Need help?
General
