D
Check Document Size on the Printer Settings tab
of the printer driver.
The paper size set in the application is displayed
automatically. However, the paper sizes (page
sizes) of some applications such as PowerPoint
may not be displayed correctly. In such a case,
click Settings... and specify the size in the
displayed Change Paper Size dialog box.
If the desired size is not available in the
pull-down menu of the Change Paper Size dialog
box, click Custom Paper Size... and then set and
save a custom size.
U “Printing at Non-Standard Sizes” on
page 58
E
Set Output Size.
To enlarge or reduce the size, select from the
pull-down menu below the Document Size.
See the following for more details on
enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 53
F
Select Source and check the roll paper width and
media type.
Select from Roll Paper, Auto Sheet Feeder, or
Sheet. If you select a paper source for which paper
is not loaded in the printer,
appears.
For Roll Paper Width and Media Type, the
settings configured in the control panel of the
printer are applied automatically.
Note:
If you load or change paper after opening the
printer driver screen, click the Acquire Info button
to update the settings.
G
Check that the Print Preview check box is
selected and then click OK.
If a preview is not necessary, clear the check box
and then click OK.
SC-F500 Series User's Guide
Printing with the Printer Driver from Your Computer
43
To Next Page
Loading...
Need help?
General
