D
Select Color Matching from the list, and then
click ColorSync.
When performing color matching in an
application such as Photoshop, select Off (No
Color Management) in Printer Settings.
E
Check that this printer is selected, and then set
the paper size.
There are three options available for each paper
size. For example, if you click A2, the following
three options are displayed.
❏ A2
❏ A2 (Retain Scale)
❏ A2 (Roll Paper Banner)
Normally, you should select the option without
parenthesis (A2 in the example above). Select one
of the other two options in the following
situations.
Retain Scale
In the following procedure, the PDF or image
data may be printed at a slightly reduced size even
if the output size is Same as Paper Size. This is
done to secure the necessary margins (3 mm on
each side) for this printer. Select this when you
want to print at the full size without any
reduction.
Roll Paper Banner
Select to make long prints on roll paper using
banner printing software.
F
Select Printer Settings from the list and set
Output Size.
If Printer Settings is not displayed in the list, the
dedicated printer driver for this printer has not
been added. See the following and then add the
printer driver.
U “How to Select the Dedicated Printer Driver
for This Printer” on page 50
To enlarge or reduce the size, select from the
pull-down menu below the Paper Size.
See the following for more details on
enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 53
SC-F500 Series User's Guide
Printing with the Printer Driver from Your Computer
49
To Next Page
Loading...
Need help?
General
