What to do if my Epson SC-S70600 Printer does not turn on?
If your Epson printer isn't turning on, start by checking the power cable. Ensure it's securely plugged into both the electrical outlet and the printer. If it is, test the electrical outlet by plugging another device into it to confirm it works.
Why Epson SC-S70600 Printer sounds like it is printing, but nothing prints?
If your Epson printer sounds like it's printing but no ink is on the paper, several factors could be at play. First, ensure the printer's interface cable is securely plugged into both the computer and the printer. Verify that the interface cable specifications match those required by both the printer and the computer. If you're using a USB hub, try plugging the USB cable directly into your computer's USB port. If the message 'Motor Self Adjustment' is displayed on the control panel's screen, wait without turning off the printer. Also, disconnect the USB hub from the computer and connect the computer directly to the printer to ensure the USB hub is recognized correctly. Finally, confirm the printer operation by printing a test pattern.
To Next Page
General