Epson SC-S70600 Series Using Orange Ink

When Change Orange Ink does not appear even
if the printer firmware version is latest, contact
your dealer or Epson Support.
Next, follow the guidance on the screen to change
the cartridge. When the screen returns to its state
before the ink change, the change procedure is
finished.
When printing next, check the nozzles for clogs.
U User's Guide (PDF) Printing nozzle check
patterns
Note:
When ink cartridges that were removed halfway
may be used later, observe the following storage
precautions.
U User's Guide (PDF) Notes on handling ink
cartridges
Precautions after Running
Change Orange Ink
❏ If the color appears to have changed when
reprinting print data that was created before the
orange ink type was changed, create a profile
specifically for the type of orange ink you use, and
then create print data again.
❏ When you want to change the type of orange ink
again, run Change Orange Ink again.
U “Changing Orange Ink” on page 4
❏ Each time Orange and Orange Plus ink are
changed, ink (Orange/Orange Plus and Yellow)
and cleaning fluid are used. We recommend
printing print data that uses the same type of orange
ink at the same time to reduce the number of
changes.
EPSON SC-S70600 series Using Orange Ink
Changing Orange Ink
5

Epson SC-S70600 Series Specifications

General

Brand	Epson
Model	SC-S70600 Series
Category	Printer
Language	English