Epson STYLUS 400 - Removing Waste Ink Drain Pad Tray Assembly a

Disassembly and Assembly
EPSON Stylus COLOR 400 Service Manual
3
-1
2
3.2.4.2 Removing Waste Ink Drain Pad Tray Assembly A
1. Remove the housing. (See Section 3.2.1.)
2. Remove the control panel. (See Section 3.2.3.)
3. Remove 1 screw (No. 4) securing the waste ink tray assembly on the right side of the printer mechanism.
4. Also on the right side of the printer mechanism, release the hook securing waste ink tray assembly A to
the frame and remove it, pulling it downward.
;
When installing waste ink tray assembly A, be sure to attach it with the spacer tray on the left side of
the printer mechanism.
WORK POINT
Spacer Tray
(No. 4)
Waste Ink Drain Pad Tray Assembly A
Figure 3-8. Removing Waste Ink Tray Assembly A