17
System Requirements
Installing EpsonNet WinAssist
Before you install the software, make sure you set up the required protocols and
services in your operating system. If you install EpsonNet WinAssist before you add
or delete protocols or services, the software may not work. You may need to uninstall
and then reinstall it. See the Administrator’s Manual for more information.
Follow these steps to install EpsonNet WinAssist:
1. Insert the CD-ROM in your drive. You see the Installation Program window.
2. Double-click
Install EpsonNet WinAssist
, then follow the instructions on the
screen to install the program.
You can also run the
SETUP.EXE
program in the
ENWINA\Disk1
folder on the
CD-ROM.
EpsonNet MacAssist
The EpsonNet MacAssist program lets you configure the print server for TCP/IP or
AppleTalk in a Macintosh environment. This section includes system requirements
and installation instructions for EpsonNet MacAssist. See the Administrator’s Manual
for complete instructions on using EpsonNet MacAssist.
Operating system Windows 95/98
Windows 2000 Server and Professional
Windows NT 4.0 Server and Workstation
CPU i486/DX (Pentium
®
or better recommended)
Memory 8MB (for Windows 95/98)
16MB (for Windows 2000/NT 4.0)
Hard disk space 8MB
Start.book Page 17 Tuesday, October 3, 2000 5:14 PM
To Next Page
Loading...
Need help?
General