9
Installing the Ink Cartridges
1. Make sure the printer is turned off (the
P power button should be up). Then
plug the printer’s power cord into a grounded outlet.
Don’t use an outlet controlled by a wall switch or timer, or one
that uses the same circuit as a large appliance. This may
disrupt the power, which can erase memory or even damage
the power supply.
Always use the
P power button to turn the printer on or off.
Never use the external switch on a power strip.
2. Lower the printer’s output tray and open the cover.
3. Press the
P power button to turn on the printer. The
P power light flashes and
the
B and
A
ink out lights come on. The black ink cartridge holder moves
slightly left to the loading position.
Start.book Page 9 Tuesday, October 3, 2000 5:14 PM
To Next Page
Loading...
