89
No
Printer Icon Appears in Windows Taskbar
Slow Printing
Cannot Print Over a Network
Nothing Prints, Even Though the Encender (On) Light Is On
• Make sure the USB cable is connected securely at both ends and meets the requirements.
• Run a printer check. If the test page prints, make sure your software is installed correctly.
Printing Noise Occurs, Even Though Nothing Prints
• Check to see if the print head nozzles are clogged.
• The Epson Stylus CX7300 Series won’t operate properly if it’s tilted or at an angle. Place it on
a flat, stable surface that extends beyond the base in all directions.
Noise Occurs When the Product Sits for a While
The Epson Stylus CX7300 Series is performing routine maintenance.
No Printer Icon Appears in Windows Taskbar
Try restarting your computer. If you still don’t see the icon, follow these steps:
1. Do one of the following:
Windows Vista:
Click , select Control Panel, and click Printer under Hardware and Sound.
Windows XP:
Click Start, select Control Panel, then select Printers and Faxes (or Printers and Other
Hardware and then Printers and Faxes).
Windows 2000:
Click Start, point to Settings, then select Printers.
2. Right-click EPSON Stylus CX7300 Series and select Printing Preferences or Properties.
3. Click the Maintenance tab.
4. Click the Speed & Progress button, then click the Monitoring Preferences button.
5. Click the Shortcut Icon box. Then click OK to close the open windows.
Slow Printing
Make sure your system meets the requirements. If you’re printing a high-resolution image, you
need more than the minimum requirements listed. You may also need to:
• Clear space on your hard drive or run a defragmentation utility.
• Close programs that you’re not using.
• Increase your system’s memory.
For the fastest printing, try these tips:
• Choose Black Ink Only in your printer settings if your document doesn’t include color.
• For Windows, choose Draft for Quality Option.
To Next Page
Loading...
