90
• For Macintosh, set the Quality/Speed slider to Speed.
•Make sure Quiet Mode is not selected.
• If the Epson Stylus CX7300 Series is connected to a USB hub, disconnect unused USB
devices.
Cannot Print Over a Network
You need to set up your software properly for network printing.
Page Layout and Content Problems
Image Is Inverted Like a Mirror Image
Blank Pages Print
Too Many Copies Print
Incorrect Margins
White Border on Borderless Photo
Incorrect Characters Print
Incorrect Image Size or Position
Image Is Inverted Like a Mirror Image
• Turn off the mirror setting in your application program.
• Turn off the Mirror Image setting in the printer driver in the Page Layout window
(Windows) or Print Settings windows (Macintosh). If you are printing on Epson Iron-on Cool
Peel Transfer Paper, however, the image should be inverted.
Blank Pages Print
• In Windows, make sure the EPSON Stylus CX7300 Series is selected as your printer. For
Macintosh, make sure your Stylus CX7300 is selected in the Page Setup and Print windows.
• Check to see if the print head nozzles
are clogged.
Too Many Copies Print
Make sure that the Copies option in your printer software or program is not set for multiple
copies.
Incorrect Margins
• Make sure the paper settings are correct for your paper size in the Windows or Macintosh
printer software.
• Choose the correct margins for your paper size in your printing program.
•Use the Print Preview option in your Windows or Macintosh printer software to check your
margins before you print.
• Make sure your paper is positioned next to the right side of the feeder.
White Border on Borderless Photo
• Make sure you are printing on a paper that supports borderless printing.
To Next Page
Loading...
