91
• In the Windows
printer software, make sure you selected the Borderless option.
In the Macintosh printer software, make sure you selected a Paper Size listed as Sheet
Feeder - Borderless.
•Use the Expansion setting in the Windows or Macintosh printer software to adjust how the
image fits on the page.
• Do not choose a custom paper size setting when printing borderless photos.
Incorrect Characters Print
• Make sure the USB cable is securely connected and meets the requirements. Then try printing
again.
• Make sure your printer is selected in Windows, or is set as the active printer in Print Center
(Macintosh).
• If you’re using a switch box or USB hub with your printer, connect the printer directly to your
computer.
• Turn the Epson Stylus CX7300 Series off, check that the cables are securely connected, and
turn it back on again.
Incorrect Image Size or Position
• If you are copying, make sure you selected the correct paper size on the control panel. See
Copy a Document or Photo for details.
• If you are printing from your computer, make sure the paper and layout options are set
correctly in your Windows or Macintosh printer software.
Print Quality Problems (quality is correct on screen)
If your printout has a quality problem but the image looks fine on your computer screen, check the
solutions in this section.
If the image also looks incorrect on screen, check for image quality problems.
Printout Has White or Dark Lines Across It
Printout Is Blurry or Smeared
Printout Is Faint or Has Gaps
Printout Is Grainy
Incorrect Colors in Printout
Printout Has White or Dark Lines Across It
• The print head nozzles may need cleaning.
• Select a higher Quality Option or Print Quality and turn off High Speed mode in the
Windows
or Macintosh printer software.
• Make sure the paper Type or Media Type setting
matches the paper you loaded.
• Make sure the printable side of the paper is face-up. It’s usually brighter or whiter.
• The ink cartridges may need replacing
.
To Next Page
Loading...
