Epson Stylus CX8400 Series User Manual

Replacing Ink Cartridges 35
7. Insert the new ink cartridge into the holder and push it down until it clicks
into place.
8. Once you replace all the cartridges that need replacing, close the cartridge
cover and push it down until it clicks into place.
9. Close the scanner.
10. Press
OK to begin charging the ink. This takes
about 2 minutes. When you see a completion
message on the display screen, ink charging is
finished.
Caution:
Never turn off the CX8400 Series while ink is
charging or you’ll waste ink. If you see an ink
replacement message on the display screen, press
OK and press down all the cartridges securely.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
If you remove an expended ink cartridge or a cartridge after the low ink message
appears, you cannot reinstall and use the cartridge.
cx7400_cx8400_qg.book Page 35 Friday, March 28, 2008 6:04 PM

Epson Stylus CX8400 Series Specifications

General

Print Technology	Inkjet
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Copying	Yes
Connectivity	USB 2.0
Paper Handling Input	120 sheets
Copy Resolution	1200 x 2400 dpi
Print Resolution	5760 x 1440 dpi
Media Sizes	Letter, Legal, A4, A6
Operating Systems Supported	Apple Mac OS X 10.2.8
Functions	Print, Scan, Copy
Ink Cartridge Configuration	4 individual ink cartridges
Ink Cartridges	1 x black - Epson T069120, 1 x cyan - Epson T069220, 1 x magenta - Epson T069320, 1 x yellow - Epson T069420