Epson Stylus NX420 Series User Manual

10 Wireless Network Setup
10. Follow the on-screen instructions to install the rest of your software.
When installation is complete, remove the CD.
To set up additional computers to print to the NX420 Series, see “Setting up
Additional Computers” on page 14.
Setting Up With the Printer Buttons
1. Follow the instructions on the screen to start the printer’s wireless Setup
Wizard.
2. When you see this screen, use the printer’s buttons to select the name of your
wireless network, then press x
Start.
If your network name isn’t listed, try the following:
■ Make sure that your wireless router or access point is turned on and
working correctly. Press the
y Stop/Clear Settings button to return to
the previous screen, press x
Start to select Setup Wizard, then repeat
step 2.
■ If you still can’t find the network name in the list, your router or access
point is not broadcasting its network name. Press l or r to select
Other
SSIDs
, then press x Start. Continue with the steps in “Entering Your
SSID Manually” on page 13.

Epson Stylus NX420 Series Specifications

General

Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Ink Cartridge Configuration	4 individual ink cartridges
Print Technology	Inkjet
Connectivity	USB, Wi-Fi
Max Paper Size	8.5 x 44 inches
Copy Speed (Color)	1.8 cpm
Paper Sizes	Letter, Legal, A4, 4x6 in, 5x7 in, 8x10 in, Envelopes
Paper Capacity	100 sheets
Ink Cartridges	Black, Cyan, Magenta, Yellow
Display	LCD screen