Epson Stylus OFFICE B30 - Disassembling Printer Mechanism; Removing Printer Mechanism (Lower Housing)

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70 Revision C
DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 74
Confidential
4.5 Disassembling Printer Mechanism
4.5.1 Removing Printer Mechanism (Lower Housing)
 Part/Unit that should be removed before removing Printer Mechanism
Upper Housing
 Removal Procedure
1. Remove the screws (x4) that secure the Printer Mechanism to the Lower Housing,
and remove it.
Figure 4-25. Removing Printer Mechanism
C A U T I O N
When lifting the Printer Mechanism, be sure to hold the positions
specified in the figure below to prevent the Main Frame from
becoming deformed.
Figure 4-24. Printer Mechanism Handling Precaution
Right Hand Position
Left Hand Position
Tighten the screws in the order given in Figure 4-25.
4
3
1
2
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)