Epson Stylus OFFICE B30 - Upper Paper Guide

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70 Revision C
DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 90
Confidential
4.5.14 Upper Paper Guide
 Part/Unit that should be removed before removing Upper Paper Guide
Upper Housing/Lower Housing/Main Board Unit/Left Frame/Panel Unit/Front
Frame/Right Frame/CR Motor/CR Scale/Hopper/Main Frame Assy.
 Removal Procedure
1. Release the hooks (x6), and remove the Upper Paper Guide.
Figure 4-67. Upper Paper Guide
 Put the part of the Timing Belt that has serrated surface on its
both sides into the groove of the CR Unit.
Figure 4-66. Installing Timing Belt
 After removing/replacing the CR Unit, be sure to perform the
specified adjustment. See
Chapter 5 “ ADJUSTMENT” (p.98)
 After replacing the CR Unit, be sure to perform the required
lubrication. See
Chapter 6 “ MAINTENANCE” (p.107)
After removing/replacing the Upper Paper Guide, be sure to
perform the specified adjustment.
See Chapter 5 “ ADJUSTMENT” (p.98)
Upper Paper Guide
Hook