2013/Feb/08
Revision: 1 Page: 27
5.1.2. Initialize printer ESC @
ESC @ Ver 1.00
[Name] Initialize printer [Setting]
[Format] 1BH, 40H
[Range of Definition] -
[Function] 1) The various settings are returned to their initial values.
2) The Y axis origin of the page management coordinate system and the position
management coordinate system are set to the current printing position on the Y axis.
3) The present printing position on the X axis is set to the origin upon the X axis.
4) Text mode printing is selected.
[Initial State] -
[Related Commands]
[Setting] Commands whose settings are affected by this command.
The settings for all commands are returned to their initial states.
[Setting] Commands that change the effects of this command.
None
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
To Next Page
Loading...
