2013/Feb/08
Revision: 1 Page: 45
5.1.19. Turn unidirectional mode on/off ESC U n
ESC U n Ver 1.00
[Name] Turn unidirectional mode on/off [Setting]
[Format] 1BH, 55H, n
[Range of Definition] n=00H, 01H, 02H, 30H, 31H, 32H
[Function] 1) The printing direction is selected according to the value of n in the following manner:
n=00H or 30H: selects bi-directional printing
n=01H or 31H: selects unidirectional printing (0 to 80 column)
n=02H or 32H: selects best suited printing
n=03H or 33H: selects unidirectional printing (80 to 0 column)
2) If n has any value other than the above, this command is ignored.
[Initial State] Bi-directional printing
[Related Commands]
[Setting] Commands whose settings are affected by this command.
ESC @ initialized values may be cancelled by this command.
[Setting] Commands that change the effects of this command.
ESC @ command will return the printer to its Initial State values.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
To Next Page
Loading...
