EPSON Stylus Photo R800 Revision A
TROUBLESHOOTING Overview 48
Table 3-5. Phenomenon-Based Paper Jam Error Check Points
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
At operation At the time of paper ejection,
the PF Roller advances the
paper but cannot eject it
completely.
– 1. Check that the size of the fed paper is not larger than that
of the paper set on the driver side.
1. Since the paper length is larger than the
specifications, notify the user.
Paper is not ejected
completely and causes a jam
near the Paper Eject Frame.
ASF Assy. 1. Check that the paper is fed along the Right Edge Guide. 1. Feed the paper along the Right Edge
Guide.
Paper EJ Frame
Assy.
1. Check that the Star Wheel Units have not come off the
Paper EJ Frame Assy.
1. Securely install the Star Wheel Units to
the Paper EJ Frame Assy.
2. Check the Paper EJ Frame Assy. for deformation or
damage.
2. Change the Paper EJ Frame Assy. for a
new one.
Spur Gear 54
and Spur Gear
18 (Paper EJ
Roller Assy.
(front/rear))
1. Check the Spur Gear 54 or Spur Gear 18 for damage. 1. Change the Front (or Rear) Paper EJ
Roller Assy. for a new one.
Paper EJ Frame Assy.
Star Wheel Units
Rear Paper EJ
Roller Assy.
Spur Gear 18
Spur Gear 54
Front Paper EJ
Roller Assy.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
