Epson Stylus Photo R800 - Page 48

EPSON Stylus Photo R800 Revision A
TROUBLESHOOTING Overview 49
Table 3-6. Phenomenon-Based Card Loading Error Check Points
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
During printing Printing starts but paper is
not fed.
– 1. Check that the card size paper is loaded in the portrait
orientation.
1. Load the cards of the same size correctly,
and press the Paper Switch to eject the
jammed paper.
The card size paper is loaded
correctly, but Card Loading
Error is displayed.
PW Sensor
1. Check that the PW Sensor FFC is not disconnected from
the CR Encoder Board or PW Sensor Connector.
1. Connect the FFC to the CR Encoder
Board or PW Sensor.
2. Check the PW Sensor or PW Sensor FFC for damage. 2. Change the PW Sensor for a new one.
PW Sensor
Connector
FFC
CR Encoder Board
Connector
Download Service Manual And Resetter Printer at http://printer1.blogspot.com