Epson Stylus Pro 4000 - Page 26

26
26 | Setting Up Client Systems
9. Select Custom and click the Settings button.
10. You see this screen:
Select the following settings:
• Protocol: LPR
•
Queue Name: enter the ColorBurst Print Server Name
(case-sensitive; found in the ColorBurst RIP Preferences window;
see “Setting the Print Server Name” on page 13)
• Select the LPR Byte Counting Enabled checkbox
11. Click
OK.
12. Click
Next.
ColorBurst.book Page 26 Thursday, September 9, 2004 12:41 PM