43
| 43
The environment you choose for your paper type and print resolution
includes what are normally the optimum color settings for your
Stylus Pro 4000. If you notice that the colors are not what you expect, or if
you would like to adjust the color management settings to meet your specific
needs, you can make changes to the ColorBurst RIP’s color management
settings and linearize the RIP and your Stylus Pro 4000, if necessary. See
these sections:
• “Using Color Management Settings in Mac OS X” below
• “Using Color Management Settings in Windows” on page 47
• “Relinearizing an Existing Printer Setup” on page 51
Using Color Management Settings in Mac OS X
Click the Ink & Color Settings button in the ColorBurst RIP window to
view the Ink & Color Settings window. The settings are described below.
When you are done making changes to settings, click
OK.
• Ink Curves - Channel Ink Reduction: The sliders allow you to adjust
the maximum amount of a specific ink that is used for the current active
environment. You can increase colors by increasing the percent value
with the slider. You can reduce colors by decreasing the slider value. You
can also type in specific percentages.
Color
Management
and Printer
Linearization
Note: All ICC profile files
need to be copied into
the ColorBurst RIP for
Epson > ICC Profiles
folder for the RIP to
see them.
ColorBurst.book Page 43 Thursday, September 9, 2004 12:41 PM
To Next Page
Loading...
