40
40 | Managing Print Jobs on the Mac OS X RIP Server
• Activating:
To allow a held print job to start printing, highlight the file
name and click
Activate. The Status changes from Hold to Ready. If
the RIP is set to
RIP On, the print job starts printing.
•Canceling: To stop a print job, highlight the file name and click
Cancel. You can only cancel print jobs that are currently printing. The
file is not deleted from the RIP List, so you can print it later or delete it,
as described below.
• Deleting: To delete a print job from the RIP List or the Done List, click
the file name and click
Delete.
Changing File Attributes
You can adjust print size, rotation, and the number of copies for each file
that is sent to ColorBurst. You cannot make changes to the file attributes
while a file is printing.
1. Double-click a File Name in the RIP List.
2. You see this screen:
ColorBurst.book Page 40 Thursday, September 9, 2004 12:41 PM
To Next Page
Loading...
