30
30 | Setting Up Client Systems
Setting Up Windows Clients to Print to a
Windows RIP Server
1. Make sure the network is set up and the ColorBurst RIP is running.
2. Windows 2000: Click
Start > Settings > Printers.
Windows XP: Click
Start > Control Panel > Printers and Other
Hardware > Printers and Faxes
.
3. Double-click the
Add Printer icon, then click Next.
4. The following screen appears. Make sure the
Network printer button is
selected. Then click
Next.
ColorBurst.book Page 30 Thursday, September 9, 2004 12:41 PM
To Next Page
Loading...
