54
54 | Color Management and Printer Linearization
Linearizing in Windows
1. Choose an environment file in the Environment > Load menu in
ColorBurst, then click
Open.
2. Click
Options > Linearization Options.
3. Click
Select a lin file and choose a linearization file for your target.
4. Choose a linearization target setting and click
Print target. After the
target prints, let it dry completely.
5. Double-click the ColorBurst ColorCatch icon on your
desktop to start ColorCatch.
ColorBurst.book Page 54 Thursday, September 9, 2004 12:41 PM
To Next Page
Loading...
