EasyManua.ls Logo

Epson Stylus Pro 4800 - Safety Instructions

Epson Stylus Pro 4800
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R4CD400
Setup Guide Rev. C
ENGLISH.FM A4 size
12/15/04
R
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
3
English
Safety Instructions
Read all of these instructions before using your
printer. Also be sure to follow all warnings and
instructions marked on the printer.
Warning, Cautions, and Notes
w
Warnings must be followed carefully to avoid
bodily injury.
c
Cautions must be observed to avoid damage to
your equipment.
Notes contain important information and useful tips
on the operation of your printer.
When choosing a place for this
product
Place this product on a flat, stable surface that
is larger than this product. This product will
not operate properly if it is tilted or at an angle.
Avoid places subject to rapid changes in
temperature and humidity. Also keep this
product away from direct sunlight, strong
light, or heat sources.
Avoid places subject to shocks and vibrations.
Keep this product away from dusty areas.
Place this product near a wall outlet where the
plug can be easily unplugged.
If you use a stand, the stand must be able to
support at least 50 kg (110.3 lb).
When setting up this product
Use only the type of power source indicated
on this product’s label.
Use only the power cord that comes with this
product. Use of another cord may result in fire
or electric shock.
This product’s power cord is designed for use
with this product only. Using it with other
equipment may result in fire or electric shock.
Do not use a damaged or frayed power cord.
If you use an extension cord with this product,
make sure the total ampere rating of devices
plugged into the extension cord does not
exceed the cord’s ampere rating. Also, make
sure the total ampere rating of all devices
plugged into the wall outlet does not exceed
the wall outlet’s ampere rating.
Do not block or cover the openings in this
product’s cabinet.
When using this product
Do not put your hand inside this product or
touch the ink cartridges during printing.
Do not move the print head by hand;
otherwise you may damage this product.
Do not insert objects through the slots. Take
care not to spill liquid on this product.
Do not attempt to service this product
yourself.
Unplug this product and refer servicing to
qualified service personnel under the
following conditions:
T he pow er cor d o r p lu g is da mag ed ; l iqu id ha s
entered this product; this product has been
dropped or the cabinet damaged; this product
does not operate normally or exhibits a
distinct change in performance.
40 cm
or more
15 cm
or more
35 cm
or more
15 cm
or more

Other manuals for Epson Stylus Pro 4800

Related product manuals