EasyManua.ls Logo

Epson Stylus Pro 4800 - Assembling the Printer

Epson Stylus Pro 4800
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R4CD400
Setup Guide Rev. C
ENGLISH.FM A4 size
12/15/04
L
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
4
When handling the ink cartridges
Keep ink cartridges out of the reach of
children and do not drink their contents.
Store ink cartridges in a cool, dark place.
If ink gets on your skin, wash it off with soap
and water. If ink gets in your eyes, flush them
immediately with water.
Shake an ink cartridge well before installing it
for best results.
c
Caution:
Do not shake cartridges (that have been
installed previously) with too much force.
Do not use an ink cartridge beyond the date
printed on the cartridge carton.
Use up the ink cartridge within six months of
installation for best results.
Do not dismantle the ink cartridges or try to
refill them. This could damage the print head.
Do not touch the ink supply port or its
surrounding area and the green IC chip on the
side of the ink cartridge. Doing so may affect
normal operation and printing.
Assembling the Printer
Checking the contents
Make sure that all of the items shown are included,
and are not damaged.
Note:
The contents in the printer box vary by location.
There are 4 ink cartridges for EPSON Stylus Pro
4400 and 8 ink cartridges for EPSON Stylus Pro
4800.
Printer
Ink cartridges
Power cord
Roll paper spindle and gray attachments for
roll paper with 3-inch core
Paper tray

Other manuals for Epson Stylus Pro 4800

Related product manuals