R4CD400
Setup Guide Rev. C
ENGLISH.FM A4 size
12/15/04
L
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
6
Installing the ink cartridges
w
Warning:
The ink cartridges are self-contained units.
Under ordinary use, ink does not leak from the
cartridges. If ink does get on your hands, wash
them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with
water.
Note:
❏ The ink cartridges packed with your printer are
provided only for initial ink charging.
❏ Because initial ink charging consumes a large
quantity of ink, you may need to replace the ink
cartridges soon.
❏ Initial ink charging requires approximately
8 minutes.
❏ Each slot can hold a particular color of ink. Be sure
to install the ink cartridges in the correct slots
according to the ink mode you choose.
❏ The following illustration uses EPSON Stylus Pro
4800. Slot # 5 to 8 are not available on EPSON
Stylus Pro 4400.
❏ The right ink compartment of EPSON Stylus Pro
4400 cannot be opened. Do not press the cover too
hard; otherwise, you may break it.
1. Turn on the printer by pressing the Power
button. After a short time NO INK CRTG appears
on the LCD.
2. Open the ink compartment cover(s) by
pushing it.
3. Raise the ink levers.
4. Remove the package from an ink cartridge,
and then shake the ink cartridge well for best
results.
No. EPSON Stylus Pro 4800 EPSON Stylus Pro 4400
#1 Matte Black or
Photo Black
Matte Black
#2 Cyan Cyan
#3 Magenta Magenta
#4 Yellow Yellow
#5 Light Black -
#6 Light Cyan -
#7 Light Magenta -
#8 Light Light Black -
1234 5678
To Next Page
Loading...
