Epson Stylus Pro 7890 - Page 134

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Printing Varieties
134
XXXX (Roll Paper - Borderless (Auto
Expand))
XXXX (Roll Paper - Borderless (Retain
Size))
XXXX (Sheet - Borderless (Auto Expand))
XXXX (Sheet - Borderless (Retain Size))
Where XXXX is the actual paper size, such
as A4.
When using Mac OS X 10.4, or if items on
the Page Setup screen are not displayed on
the Print screen due to the application
being used in Mac OS X 10.6 or 10.5, display
the Page Setup screen and make settings.
B
If Auto Expand is selected, set how much of
the image goes beyond the edge of the
paper in the Expansion screen.
Select Page Layout Settings from the list.
The following shows how much the image
will be larger than the paper edges.
C
When printing on roll paper, select Auto
Cut.
See “About Roll Paper Cutting” on page
132
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
Standard : 3 mm for left and right
Min : 1.5 mm for left and right
Note:
Moving the slider towards Min decreases the
image enlargement ratio. Therefore, some
margins may appear at the edges of the paper
depending on the paper and printing
environment.