Epson Stylus Pro 7890 - Removing the Roll Paper

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Paper Handling
36
Removing the roll paper
A
Make sure the printer is turned on.
B
Open the roll paper cover.
C
Press the button to release the paper
presser.
The roll paper is rewound automatically if
the printer state is after the paper cut but in
the READY state. However, when using the
optional Auto Take-up Reel Unit, the
printer does not rewind the roll
paper.Rewind the roll paper manually, if it
is not automatically done.
Note:
We recommend that you remove the roll paper from
the printer after printing. If the paper roll is left in the
printer, the roller for securing the paper may leave a
mark on the surface of the paper.
Note:
When you are not using the roll paper, wrap it
using the optional roll paper belt.