Epson Stylus Pro 7890 - Printing Varieties; Banner printing (on roll paper)

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Printing Varieties
148
D
Click OK.
You can select the paper size you saved
from the Paper Size pop-up menu.
You can now print as normal.
Banner printing (on roll
paper)
You can print banners and panoramic pictures if
you create and set print data for banner printing
in your application.
There are two ways to print a banner.
* Create print data at a size supported by the given
application while maintaining the printing length
and width ratio.
The following printing sizes are available.
The minimum paper size supported by this
printer is 210 (width) x 297 (length) mm. If you
create a user-defined paper size smaller than this
minimum size, you can print on paper that is
larger than 210 (width) x 297 (length) mm, and
then trim the margins to the size you require.
Note:
❏ To change the contents that you saved, select
the paper size name from the list on the left of
the Custom Paper Sizes screen.
❏ To duplicate the user-defined size you saved,
select the paper size name from the list on the
left of the Custom Paper Sizes screen, and
then click Duplicate.
❏ To delete the user-defined size you saved,
select the paper size name from the list on the
left of the Custom Paper Sizes screen, and
then click -.
❏ The custom paper size setting differs
depending on the operating system version.
See your operating system's documentation
for details.
Printer Driver Source Supported
Applications
Roll paper Document preparation
software, image
editing software, and
so on
*
Roll paper (Banner) Applications that
support banner
printing