Epson Stylus Pro 7890 - Test Print

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
The Control Panel
23
TEST PRINT
MAINTENANCE
You can perform maintenance functions, such as head cleaning.
Item Parameter Explanation
NOZZLE CHECK PRINT You can print a print head nozzle check pattern for
each ink cartridge.
See “Nozzle check” on page 76
STATUS SHEET PRINT You can print the current printer status.
NETWORK STATUS SHEET PRINT You can print the current network status.
JOB INFORMATION PRINT You can print the job information saved in the printer (up
to 10 jobs.)
CUSTOM PAPER PRINT You can print custom paper information registered in
the CUSTOM PAPER menu.
Item Parameter Explanation
CUTTER ADJUSTMENT EXECUTE You can fine tune the cutting position when printing to
roll paper with no margins in all directions. When using
this function, a cutter position adjustment pattern is
printed. You can select the cutter position number
within a range of -120 to +120 mil (-3.0 to +3.0 mm) in
increments of 8 mil (0.2 mm).
CUTTER REPLACEMENT EXECUTE Starts the cutter replacement operation.
See “Replacing the Cutter” on page 72
CLEANING NORMAL CLEANING You can perform normal cleaning.
CLEAN EACH COLOR You can select the nozzles to clean from the following
two-color combinations; C/VM, PK (MK)/LK, LLK/Y, or
VLM/LC.
POWER CLEANING You can clean the print head more effectively than
normal head cleaning.
CLOCK SETTING MM/DD/YY HH:MM You can set year, month, date, hour, and minute.